We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Epoxy adhesive.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Epoxy adhesive(fpc) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Epoxy adhesive Product List

1～28 item / All 28 items

Displayed results
One-Hand Mixing for Conductive Repair of Flexible PCBs

One-Hand Mixing for Conductive Repair of Flexible PCBs

For repairing conductivity in thin substrates and narrow areas. No measuring or hand mixing required. Just press to automatically mix the two components, allowing for easy conductivity connections at room temperature without the use of solder.

For the repair of conductive connections in components that are difficult to apply heat or mechanical stress, such as FPCs and thin film substrates. ONE-HAND MIXING is easy to apply to targeted areas and is suitable for repair applications around flexible printed circuit boards where soldering is challenging. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Circuit pattern disconnection repair ONE-HAND MIXING

Circuit pattern disconnection repair ONE-HAND MIXING

For simple repairs of poor connections and pattern breaks. No measuring or hand mixing required. Just press to automatically mix the two components, allowing for easy connections at room temperature without solder.

ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and SUS, without the use of a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Narrow section connection ONE-HAND MIXING

Narrow section connection ONE-HAND MIXING

For connections in hard-to-reach places where tools are difficult to use. No measuring or hand mixing required. Simply press to automatically mix the two components, allowing for easy connections at room temperature without the need for solder.

For difficult-to-reach areas where soldering irons, screws, and crimping tools are hard to use, you can consider conductive bonding through application in narrow spaces such as fine wires, around connectors, and inside enclosures, where the working space is limited. ONE-HAND MIXING is a product that allows you to automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which helps to minimize variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive connection of plated parts ONE-HAND MIXING

Conductive connection of plated parts ONE-HAND MIXING

For achieving conductivity in plated housings and metal parts. Automatically mixes two components with just a push, allowing for easy conductivity connections at room temperature without the use of solder.

For plated housings and metal parts, it can be difficult to achieve conductive connections through soldering or screwing. By applying and curing conductive adhesive, it can be utilized for fixing ground wires, GND connections, and achieving conductivity in shielding materials. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and around sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery tab connection ONE-HAND MIXING

Battery tab connection ONE-HAND MIXING

For connections around batteries that want to avoid heat. Just press to automatically mix the two liquids, allowing for easy conductive connections at room temperature without the need for soldering.

For conductive connections in areas where heat is difficult to apply, such as battery tabs and surrounding components. It expands the options for connection methods as a low-temperature and room-temperature curing conductive adhesive in situations where soldering or welding is difficult. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sensor electrode connection ONE-HAND MIXING

Sensor electrode connection ONE-HAND MIXING

Electrodes and lead wires are fixed for conductivity at low temperatures. Just press to automatically mix the two liquids, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections such as sensor electrodes, lead wires, and thin film electrodes. Even delicate components that are difficult to apply heat or pressure to can achieve both conductivity and fixation simultaneously by applying and curing ONE-HAND MIXING. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible for materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-hand mixing for conductive connections around resin parts.

One-hand mixing for conductive connections around resin parts.

For connecting and repairing heat-sensitive resin substrates. Automatically mixes two components just by pressing, allowing for easy room temperature conductive connections without the use of solder.

When you want to make a conductive connection near resin housings or resin substrates while avoiding solder heat. ONE-HAND MIXING is a user-friendly conductive adhesive that can be used at low temperatures, making it useful for the design and repair around resin parts. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safe wiring connection without heat source ONE-HAND MIXING

Safe wiring connection without heat source ONE-HAND MIXING

Connect wires without fire or high temperatures. Automatically mix two liquids with just a push, allowing for easy electrical connections at room temperature without the use of solder.

For wiring and connections in environments where it is difficult to manage safety during high-temperature operations or where heat sources are not desired. It cures at room temperature, is not classified as a pharmaceutical hazardous substance, and complies with RoHS/REACH, reducing the burden of handling, transportation, and storage. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, minimizing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rear window defroster repair ONE-HAND MIXING

Rear window defroster repair ONE-HAND MIXING

Repair the debugger disconnection with adhesive. Just press to automatically mix the two components, allowing for easy cold connections without soldering.

For repairing the broken lines of the rear window defogger (heating wire) in vehicles. It has low viscosity, making it easy to draw lines, and can repair heating wires on glass that are difficult to solder, curing at room temperature. Its use is expanding in repair sites, including import car dealerships. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Circuit formation on curved and flexible substrates ONE-HAND MIXING

Circuit formation on curved and flexible substrates ONE-HAND MIXING

Form a conductive pattern as if drawing a line. Just by pressing, the two liquids are automatically mixed, allowing for easy conductive connections at room temperature without the need for solder.

This product is intended for applications where you want to form conductive pathways on surfaces or flexible substrates, similar to drawing lines. It allows for the formation of conductivity at room temperature, even on substrates that are difficult to solder, thereby expanding the design freedom for circuit design in prototypes, demonstration units, and wearable considerations. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solder-free electronics project ONE-HAND MIXING

Solder-free electronics project ONE-HAND MIXING

Simultaneously and safely bond components and conduct electricity. With just a push, two liquids are automatically mixed, allowing for easy electrical connections at room temperature without the use of solder.

As a conductive adhesive that allows for simultaneous bonding and electrical conduction without using a soldering iron, it is suitable for electronics projects and circuit board repairs. Since there is no heating process, it reduces the risk of burns, enabling even those who are not skilled at soldering to make electrical connections. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which helps to suppress variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for electrical connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground connection to metal housing ONE-HAND MIXING

Ground connection to metal housing ONE-HAND MIXING

For ground connections without screws or bolts. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

When you want to connect GND or earth to metal enclosures or plated parts. Even in structures where screw fastening or riveting is difficult, conductive adhesive connections enhance the design flexibility for enclosure grounding and shield connections. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for weighing or mixing operations, which suppresses variations in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. * For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum casing conductive connection ONE-HAND MIXING

Aluminum casing conductive connection ONE-HAND MIXING

For grounding/GND connection to aluminum bodies. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the need for solder.

For those considering conductive connections to aluminum enclosures, aluminum bodies, and metal components: ONE-HAND MIXING offers an option for grounding and GND connections through application, even in areas where screwing or welding is difficult. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No-screw ground connection ONE-HAND MIXING

No-screw ground connection ONE-HAND MIXING

When you want to establish a connection without using screws or terminals. Just press to automatically mix the two liquids, allowing for easy room temperature connections without solder.

For grounding connections where there is no space for screws, nuts, or crimp terminals, or where you want to reduce processes, ONE-HAND MIXING utilizes conductivity and adhesion to achieve easy electrical bonding to housings and components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Field repair of poor connectivity ONE-HAND MIXING

Field repair of poor connectivity ONE-HAND MIXING

For repair work on connections, wiring, and patterns. Just press to automatically mix the two components, allowing for easy cold connections without the use of solder.

For continuity repairs on-site, such as poor contact, broken wiring, or missing circuit board patterns. ONE-HAND MIXING is suitable for small area repairs in prototyping, evaluation, and maintenance because it allows for quick use of the necessary amount. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which reduces variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Alternative connection to spot welding ONE-HAND MIXING

Alternative connection to spot welding ONE-HAND MIXING

For conductive connections that cannot be welded. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connection of components where spot welding and soldering are to be avoided. This method can be considered for structures where heat impact needs to be minimized, and during the prototype stage where equipment installation is difficult, using conductive adhesives. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections of heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It maintains flexibility after curing, allowing it to be used for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-hand mixing for alternative conductive connection to rivets.

One-hand mixing for alternative conductive connection to rivets.

For connections with a structure that is difficult to rivet or crimp. Automatically mixes two liquids just by pressing, allowing for easy room-temperature conductive connections without the use of solder.

For conductive connections in structures where rivets, crimp terminals, and screws are difficult to use, ONE-HAND MIXING supports component design that requires miniaturization and space-saving by combining adhesive fixation through application and conductivity. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing, which reduces variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMI shielded conductive connection ONE-HAND MIXING

EMI shielded conductive connection ONE-HAND MIXING

For connecting the shield material and the chassis ground. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections between EMI shielding materials, metal enclosures, and grounds. Even in areas where screw fastening or soldering is difficult, using conductive adhesive allows for space-saving shield and ground connections. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring or mixing, reducing variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Defroster tab adhesive repair ONE-HAND MIXING

Defroster tab adhesive repair ONE-HAND MIXING

Restores terminal and tab disconnections with continuity. Automatically mixes two liquids with just a push, allowing for easy cold connections where solder cannot be used.

For repairs around terminals that cannot withstand heat or mechanical stress, such as the defroster tab of the rear window, we support urgent repairs and short delivery times with high adhesive strength and conductivity, made in Japan and available for immediate delivery. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solder-free connection ONE-HAND MIXING

Solder-free connection ONE-HAND MIXING

Components that are sensitive to heat can be connected at low temperatures. No weighing or manual mixing is required. Simply pressing a button automatically mixes the two liquids, allowing for easy connections at room temperature without the use of solder.

For electrical components, resin parts, flexible substrates, and other conductive connections that want to avoid solder heat. ONE-HAND MIXING can be utilized for conductive fixing and repair with reduced heating processes by applying and curing the necessary amount. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-hand mixing for components sensitive to heat connection.

One-hand mixing for components sensitive to heat connection.

For connections where soldering is not possible. No weighing or manual mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For those concerned about thermal damage to components and substrates and looking for alternatives to soldering for conductive connections, our room-temperature curing conductive adhesive contributes to improvements in prototyping, repairs, and small-scale production processes. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive connection of components used in low-temperature environments ONE-HAND MIXING

Conductive connection of components used in low-temperature environments ONE-HAND MIXING

For conductive connections in cold environments and low-temperature equipment. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connections of components used in low-temperature environments, such as refrigeration and freezing equipment or devices used in cold regions. ONE-HAND MIXING maintains an adhesive strength of about 70% or more even in extreme low temperatures (−196℃) during rapid cooling and heating tests, making it a candidate for evaluating connection reliability in low-temperature environments. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cold machine circuit repair ONE-HAND MIXING

Cold machine circuit repair ONE-HAND MIXING

For repairing disconnections and contacts in equipment used at low temperatures. Just press to automatically mix the two components, allowing for easy electrical connections at room temperature without the need for solder.

For repairing poor conductivity or disconnections in equipment and facilities used in cold environments. It has been confirmed that the adhesive layer functions stably even in environments where rapid temperature changes occur, avoiding solder heat with room temperature curing. This expands options for maintenance and on-site repairs. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No worry about burns with the conductive connection ONE-HAND MIXING

No worry about burns with the conductive connection ONE-HAND MIXING

No soldering iron required. Eliminate high-temperature work. Automatically mix two liquids with just a push, allowing for easy connections at room temperature without soldering.

For sites and educational purposes that want to avoid the risks of burns and component charring from high-temperature soldering iron work. ONE-HAND MIXING is a room-temperature curing type that does not require a heat source, allowing for application with a single-handed push, enabling safe electrical connections of wires and components. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for electrical connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-resistance connection approaching solder ONE-HAND MIXING

Low-resistance connection approaching solder ONE-HAND MIXING

Conductive adhesive with a volume resistivity of around 10⁻⁴ Ω·cm. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the need for soldering.

For applications where you want to minimize connection resistance even with conductive adhesives. ONE-HAND MIXING achieves a volume resistivity of 2×10⁻⁴Ω·cm at room temperature curing stability, approaching the conductivity of solder. It is suitable for conductive connections and repairs where low resistance is required. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and SUS. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wire and lead wire continuity fixation ONE-HAND MIXING

Wire and lead wire continuity fixation ONE-HAND MIXING

Fix thin wires with conductive adhesive. No weighing or hand mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For applications where you want to secure the continuity of fine wires and lead wires without using solder or crimp terminals. ONE-HAND MIXING can be applied to the necessary areas to achieve both adhesion and conductivity, making it effective for connections around sensor electrodes and small components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large Area Electrode Contact Stabilization ONE-HAND MIXING

Large Area Electrode Contact Stabilization ONE-HAND MIXING

For the adhesion and fixation of large electrodes for measurement. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

This is for applications where large electrodes in the 200-300mm range are closely adhered to materials, such as in dielectric property measurements. It helps suppress the micro-gaps that can easily occur with simple physical contact, thereby reducing measurement variability. The workability, which allows for easy position adjustment after application, is also appreciated. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which helps suppress variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor equipment continuity connection ONE-HAND MIXING

Outdoor equipment continuity connection ONE-HAND MIXING

Conductive adhesive with weather resistance test data. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the use of solder.

For grounding connections and continuity repairs of equipment and facilities used outdoors. We publish data on weather resistance test results and changes in conductivity and adhesion during environmental testing as technical documentation to support considerations for outdoor applications. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • Epoxy adhesive

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Epoxy adhesive

Related Categories of Epoxy adhesive

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.